Silicon Compound

Product Details:

• Lubrication for control and pressure plug valve, water softener and faucet valves..
• Sealant for vacuum and pressure systems.
• Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections.
• Damping medium for dashpot in electrical and electronic equipment.
• Used as an anti-stick and a sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.
• Rubber and plastic O-rings, gaskets and seals.
• Lubricating O-rings in binoculars and telescopes. Prevent fogging of delicate lenses.

• GP 171/1106 Compound can be applied by hand, specially designed automated equipment brushing or wiping. Certain designs of grease guns may seize up; test prior to use.
• GP 171/1106 Compound should not be applied to any surface which will be painted or finished. Such coatings may not adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.

Product Details:

Application

• GO 171 Heat Sink Compound is suitable for thermal coupling of electrical/electronic devices to heat sink.

Usable Life And Storage

• The product should be stored in its original packaging with the cover tightly attached to avoid any contamination. Store in accordance with any special instructions listed on the product label. The product should be used by the indicated Exp. Date found on the label.

Chemical Compatibility

• In general, the product is resistance to minimal or intermittent solvent exposure, however best practice is to avoid solvent exposure altogether .

Handling Precautions

• Compound may cause temporary discomfort when in direct contact with eyes. In case of eye contact, flush eyes with water.

Product Safety Information:

• Product Safety information required for safe use is not included in this document. Before Handling read product and material safety data sheets and container labels for safe use. The material safety data sheet is available on request.

Limitations:

• This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
• Silicone laboratory Samples (SLM) is development products. Therefore, we cannot at present give any binding assurance of constant properties or of continuous supplies in future

Other Details:

• (An iso 9001:2008 Certified Organisation)
• Products:-G.P.171 Compound
• Batch No:-16094055 DT of.12/09/2011
• Tare Weigth:-49.60gm
• Best Before:- 1 year from date of mfg