Gayatri Polychem Private Limited

• GP HS 2 1501 Silicone Emulsion has been formulated especially as a release agents/lubricant in a wide variety of cases, the following are examples of many
• uses for this well-established product. Mould release agent
• Release agent for rubber stoppers, gaskets on screw tops and bungs
• Release agent for extruded rubber parts and conveyor belts.

• Perfectly packed to ensure goodness intact 
• Efficient and durable 

• Gayatri Polychem neither represents nor tests this material for specific pharmaceutical applicable. Purchaser is fully responsible to determine end-use suitability.

• Batch No:-19105001
• Mgf Date:-12/10/2019Tare
• Weigth:2.500kg 
• Best Before:- 221101 2017

We are involved in developing and supplying Gayatri GP 21R PH Silicone Defoaming Emulsion that are formulated by using advanced technologies and necessary tools. These 42 percent active emulsions are safe to use and milky white in color. In addition, to ensure safe transit and preserve the originality of content, we pack them using tamper-proof, high grade packaging material.

• GP HS 2 205 Silicone Emulsion Should be diluted with water prior to use. Recommended dilution is 1 part GP H S-2-205 Emulsion to 50 parts cold water. Users Should evaluate on a test sample before using in production.

• Direct contact with eyes may cause temporary discomfort which can be relieved by flushing them with water.
• Safety glasses should be worn when handling GP H S -2-205- Emulsion.
• Product Safety information required for safe use is not included. Before handling, read product information, product Safety Data Sheets and container labels for safe use, any
• From your local Gayatri Polychem sales representative.

• GP HS 2 205 Silicone Emulsion will freeze, so adequate precautions should be taken. In case of freezing thaw at room temperature before use to reconstitute. To prevent freezing, store above
• When Stored at or below 35 in the original unopened container this product has useful life of 15 months from the date of production.
• Recommended for food processing uses.

• Excellent emulsion stability
• Easy application
• Good slip characteristics
• Good detergent resistance
• Excellent dilution stability
• Good surface wetting characteristics

• In aerosol spray starch products as ironing aid.
• In hard surface cleaners to protect substrates.

• Before use, the GP 355 Emulsion must be mixed thoroughly to ensure that emulsion is homogeneous.
• Depending upon the application the product may be diluted to 1-5% silicone with ambient temperature water for Injection water. The resulting solution may be applied to articles by spraying, brushing or by dipping bath. After water has evaporated which can be accelerated with heat, the resultant film is lubricious , hydrophobic film of Polydimethylsiloxane fluid.

• Product Safety information required for safe use is not included in this document. Before Handling read product and material safety data sheets and container labels for safe use. The material safety data sheet is available on request.

• Cost effective
• Reliable and durable end product
• Long-lasting use
• Specialized packaging

Our offered GP HS 2 -201 Silicone Emulsion are nature-friendly and affordable for several general purpose applications. These added to various dry products, such as instant powder, detergents and fertilizers to prevent foaming. Moreover, due to the use of fine grade raw materials these ensure elevated durability and efficiency.

Features:

• High effectiveness and purity
• Maximum uniformity

Our offered Silicone Emulsion Release Agent is specifically formulated for thermal moulding of rubber, plastics and low-melting non ferrous metals. Moreover, these provide an easy, accurate reproduction of every surface detail of the moulded article. These exhibits excellent film forming properties, which makes it an ideal choice by our patrons.

Features:

• Durable and heat stable
• Imparts excellent shine and gloss to the moulded article
• Low volatility: No fuming or smoking occurrence